MIRCO/SYS Industrial Partner

SBC1188-20 - MicroSys SBC1188-20 Complete CPU - 20MHz Simple Type: CPU Board

larger image

Request Quote
For Price
Part Number:
SBC1188-20
Model Number:
SBC1188-20
Make:
MIRCO/SYS
Lead Time:
Available
Qty In Stock:
Available

MicroSys SBC1188-20 Complete CPU - 20MHz Simple Type: CPU Board

The SBC1188 is a small, low cost PC/104 format embeddable PC. It offers a range of features making it ideal for embedded control applications, and offers quick development cycles. The standard configuration includes RAM and flash EPROM installed, and the powerful RUN.EXE firmware. This firmware allows an .EXE file to be downloaded into on-board flash EPROM through a serial port using XMODEM protocol, and then run the next time power is applied. Borland/Microsoft C/C++, Turbo Pascal, and QuickBASIC are all supported directly. With two serial ports, 24 CMOS I/O lines, three counter/timers, and a watchdog timer, the SBC1188 provides a full set of hardware for many applications. If further functionality is needed, PC/104 expansion cards can be stacked onto the SBC1188. Because the SBC1188 is completely functional as shipped, there are no memory parts to specify and buy, or other impediments to immediate project development. The SBC1188 is ready to accept a program to run upon receipt.

Download the datasheet (PDF)

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

Features

  • 24 TTL compatible I/O lines
  • 5V-only CMOS, on-board flash prog
  • 80C188EB, 128K RAM, 512K flash
  • Download .EXE file to run on card
  • Extended temperature range available
  • Real time clock, RS485 option
  • Small, low cost, ready to run
  • Turbo Debugger support
  • Two RS232 serial channels
  • Watchdog timer, PC/104 expansion

Specifications

    General
  • Environmental: 0° - +70°C operating. -40° - +85°C storage. -40° - +85°C operating, -ET version. 5%-95% relative humidity, non-condensing
  • External Connections: 10-pin headers, both serial ports. 10-pin header for counter/timers. 26-pin header for parallel I/O ports.
  • Mechanical: PC/104 standard. 3.55" (plus I/O region) x 3.775" x .6"
  • On-board Memory: 128K of static RAM, expandable to 512K. On-board RAM based at 0000:0000. 512K of flash
  • Parallel Ports: 82C55 device with 24 I/O lines. Ports programmable input or output. TTL compatible levels, 2.5mA drive.
  • PC/104 Interface: 8-bit PC/104 module support. IRQ2-IRQ6 and IOCHCHK (NMI). No DMA support.
  • Power Requirements: +5V ± 5% at 200mA max (12MHz). +5V ± 5% at 250mA max (20MHz)
  • Processor: Intel 80C188EB
  • Processor Core Section: 80C188EB CPU. 12 or 20 MHz clock rate. Includes three 16-bit timers. Interrupt controller included
  • Real Time Clock: Optional RTC with on-board battery, RTC support included in BIOS
  • Serial Ports: Two async serial ports (contact factory about sync mode) RTS and CTS modem controls. 7, 8, or 9-bit operation. Separate programmable baud generators. Not PC software compatible. CommBLOK library available for drivers
  • Watchdog Timer: Program must refresh watchdog timer periodically, or system will be reset

 

Applications

  • None Available

Aliases

  • None Available